Nettbutikken viser et lite utvalg av hva vi har av varer i butikken og kan skaffe fra våre leverandører.
Netthandelen er satt opp primært for bedrifter/industrikunder og derav viser priser eks mva.
Er du industrikunde hos oss, registrer deg for å se alle kampanjer og priser som vi har ute her på siden. Registrer deg her
Kjemikalier selges bare til bedrifter i netthandel hvor det ligger avtale.
Alle ordre som legges inn med kjemikalier til andre slettes automatisk.
Gjenngetapp metrisk fin sett med 3 tapper E513M12X1.25NO6
Set of straight flute hand taps NO6 for ISO-Metric Fine thread M12 with 1.25 mm pitch and 6H class of fit, consisting of 1 tap with a 6-8xP taper lead, 1 tap with a 4-6xP second lead and 1 tap with a 2-3xP plug lead, dimensions according to ISO 529 standard with 9.0mm shank and […]
Gjenngetapp metrisk fin sett med 3 tapper E513M10X1.0NO6
Set of straight flute hand taps NO6 for ISO-Metric Fine thread M10 with 1.00 mm pitch and 6H class of fit, consisting of 1 tap with a 6-8xP taper lead, 1 tap with a 4-6xP second lead and 1 tap with a 2-3xP plug lead, dimensions according to ISO 529 standard with 10.0mm shank and […]
Gjengetapp M5 fingjenget E513M5X.5NO3
Straight flute hand tap NO3 with a 2-3xP plug lead, for ISO-Metric Fine thread M5 with 0.50 mm pitch and 6H class of fit, dimensions according to ISO 529 standard with 5.0mm shank and 4.0mm square drive, HSS with bright finish for 1.5xD through or blind hole threading in free machining and plain carbon steel […]
Gjengetapp M5 fingjenget E513M5X.5NO2
Straight flute hand tap NO2 with a 4-6xP second lead, for ISO-Metric Fine thread M5 with 0.50 mm pitch and 6H class of fit, dimensions according to ISO 529 standard with 5.0mm shank and 4.0mm square drive, HSS with bright finish for 1.5xD through or blind hole threading in free machining and plain carbon steel […]
Gjengetapp M5 fingjenget E513M5X.5NO1
Straight flute hand tap NO1 with a 6-8xP taper lead, for ISO-Metric Fine thread M5 with 0.50 mm pitch and 6H class of fit, dimensions according to ISO 529 standard with 5.0mm shank and 4.0mm square drive, HSS with bright finish for 1.5xD through or blind hole threading in free machining and plain carbon steel […]
Gjengetapp M5 – Sett E500M5NO6
Set of straight flute hand taps NO6 for ISO-Metric thread M5 with 0.80 mm pitch and 6H class of fit, consisting of 1 tap with a 6-8xP taper lead, 1 tap with a 4-6xP second lead and 1 tap with a 2-3xP plug lead, dimensions according to ISO 529 standard with 5.0mm shank and 4.0mm […]
Gjengetapp M12 fingjenget E513M12X1.0 NO3
Straight flute hand tap NO3 with a 2-3xP plug lead, for ISO-Metric Fine thread M12 with 1.00 mm pitch and 6H class of fit, dimensions according to ISO 529 standard with 9.0mm shank and 7.1mm square drive, HSS with bright finish for 1.5xD through or blind hole threading in free machining and plain carbon steel […]
Gjengetapp M12 fingjenget E513M12X1.0 NO2
Straight flute hand tap NO2 with a 4-6xP second lead, for ISO-Metric Fine thread M12 with 1.00 mm pitch and 6H class of fit, dimensions according to ISO 529 standard with 9.0mm shank and 7.1mm square drive, HSS with bright finish for 1.5xD through or blind hole threading in free machining and plain carbon steel […]
Gjengetapp M12 fingjenget E513M12X1.0 NO1
Straight flute hand tap NO1 with a 6-8xP taper lead, for ISO-Metric Fine thread M12 with 1.00 mm pitch and 6H class of fit, dimensions according to ISO 529 standard with 9.0mm shank and 7.1mm square drive, HSS with bright finish for 1.5xD through or blind hole threading in free machining and plain carbon steel […]
Gjengetapp EP213/8 UNC
Spiral point tap with chamfer form B with a 3.5-5xP second lead, for Unified National Coarse thread UNC 3/8" with 16 TPI and 2B class of fit, dimensions according to DIN 2184-1 standard with 10.0mm shank and 8.0mm square drive, powder metallurgical HSS-E with steam tempered surface finish for 2.5xD through hole threading in general […]
Gjengetapp E500M12NO1
Straight flute hand tap NO1 with a 6-8xP taper lead, for ISO-Metric thread M12 with 1.75 mm pitch and 6H class of fit, dimensions according to ISO 529 standard with 9.0mm shank and 7.1mm square drive, HSS with bright finish for 1.5xD through or blind hole threading in free machining and plain carbon steel
E500M12NO2 Gjengetapp 12mm
Straight flute hand tap NO2 with a 4-6xP second lead, for ISO-Metric thread M12 with 1.75 mm pitch and 6H class of fit, dimensions according to ISO 529 standard with 9.0mm shank and 7.1mm square drive, HSS with bright finish for 1.5xD through or blind hole threading in free machining and plain carbon steel Description […]
Dormer gjengetapp E240M
Spiral point tap Blue Shark with chamfer form B with a 3.5-5xP second lead, for ISO-Metric thread , dimensions according to DIN 371 standard powder metallurgical HSS-E with steam tempered surface finish for 2.5xD through hole threading in stainless steel