Nettbutikken viser et lite utvalg av hva vi har av varer i butikken og kan skaffe fra våre leverandører.
Netthandelen er satt opp primært for bedrifter/industrikunder og derav viser priser eks mva.
Er du industrikunde hos oss, registrer deg for å se alle kampanjer og priser som vi har ute her på siden. Registrer deg her
Kjemikalier selges bare til bedrifter i netthandel hvor det ligger avtale.
Alle ordre som legges inn med kjemikalier til andre slettes automatisk.
Spiral flute tap with chamfer form C with a 2-3xP plug lead, for British Standard Pipe thread G 1/8" with 28 TPI and Normal class of fit, dimensions according to DIN 5156 standard with 7.0mm shank and 5.5mm square drive, powder metallurgical HSS-E with bright finish and 45° helix angle for 2.5xD blind hole threading […]
EX401.1/4 G(BSP) Machine Tap Spiral Flute 45° Material ID: 5974202 Spiral flute tap with chamfer form C with a 2-3xP plug lead, for British Standard Pipe thread G 1.1/4" with 11 TPI and Normal class of fit, dimensions according to DIN 5156 standard with 32.0mm shank and 24.0mm square drive, powder metallurgical HSS-E with bright […]
Spiral point tap with chamfer form B with a 3.5-5xP second lead, for Unified National Coarse thread UNC 3/8" with 16 TPI and 2B class of fit, dimensions according to DIN 2184-1 standard with 10.0mm shank and 8.0mm square drive, powder metallurgical HSS-E with steam tempered surface finish for 2.5xD through hole threading in general […]
Straight flute hand tap NO1 with a 6-8xP taper lead, for ISO-Metric thread M12 with 1.75 mm pitch and 6H class of fit, dimensions according to ISO 529 standard with 9.0mm shank and 7.1mm square drive, HSS with bright finish for 1.5xD through or blind hole threading in free machining and plain carbon steel
Solid round die with a gun nose, for ISO-Metric thread M6 with 1.00 mm pitch and 6g class of fit, dimensions according to ISO 2568 standard with 20mm outside diameter and 7mm thickness, cobalt based HSS-E with lapped surface finish for threading in alloy and tool steel, martensitic and austenitic stainless steel and austenitic or […]
Solid round die with a gun nose, for ISO-Metric thread M24 with 3.00 mm pitch and 6g class of fit, dimensions according to ISO 2568 standard with 55mm outside diameter and 22mm thickness, HSS with lapped surface finish for threading in free machining and plain carbon steel, ferritic stainless steel and gray, malleable, ductile and […]
Solid round die with a gun nose, for ISO-Metric thread M16 with 2.00 mm pitch and 6g class of fit, dimensions according to ISO 2568 standard with 45mm outside diameter and 18mm thickness, cobalt based HSS-E with lapped surface finish for threading in alloy and tool steel, martensitic and austenitic stainless steel and austenitic or […]
Solid round die with a gun nose, for ISO-Metric thread M10 with 1.50 mm pitch and 6g class of fit, dimensions according to ISO 2568 standard with 30mm outside diameter and 11mm thickness, cobalt based HSS-E with lapped surface finish for threading in alloy and tool steel, martensitic and austenitic stainless steel and austenitic or […]
Adjustable circular split die, for Unified National Coarse thread UNC 7/16" with 14 TPI, to reduce the torque when cutting by hand split dies can be adjusted in small increments up to a maximum of approximately 0.006", dimensions according to BS 1127:1950 standard with 1.5/16" outside diameter and 7/16" thickness, HSS with bright finish for […]
Solid round die with a gun nose, for British Standard Pipe thread G 1/8" with 28 TPI and class A tolerance, dimensions according to ISO 2568 standard with 30mm outside diameter and 11mm thickness, HSS with lapped surface finish for threading in free machining and plain carbon steel, ferritic stainless steel and gray, malleable, ductile […]
Hydraulisk girkasseløft! Denne løfteanordningen fra Bahco er designet for å løfte girkasser. Girkasseløfteren er hydraulisk og har en maksimal kapasitet på 500 kg. Den brukes under oppløftede kjøretøy for sikker demontering, montering og transport av girkasser. Det effektive løftesystemet gjør det mulig å nå full høyde med kun 38 pump. Både stang og pumpestempel er […]
Universalborhammer med skiftechuck i kategorien batteridrevne SDS plus-verktøy Et støvavsug GDE 18V-16 Professional kan fås som tilbehør og integreres i hammeren, for en separat HEPA-støvbeholderløsning KickBack Control og Electronic Precision Control for bedre kontroll over verktøyet og økt brukerbeskyttelse Med en slagenergi på 2,6 J, for rask boring og stor meislingskapasitet De viktigste dataene Slagenergi […]
GASSLINSE 3,2MM SR17/18/26
GASSHYLSE, GLASS 15/19,2MM Kemppi SP015848 Pyrex Gas Cup 28mm Long 20mm Inside Dia Komplett sett består av: SP015848 SP015843 SP015849 7990656 SP009746
Premium quality propane 1925°C • 2209 engangs propanflaske stål. Flaskene har 1" skrukobling. Artikkelnummer: 9816154 Lev.artikkelnr: 220983 Ean artikkelnr: 7314522209838 Materialklasse TMA21A2 Tekniske data Varemerke: Sievert Forpakningsstørrelser: 1 Stk/12 Stk/432 Stk Gasmiks: Propan Påfyllingsvolum: 788 ml Volum: 400 g Vekt: 1200 g Fylt: Ja Utførelse: EN 12205
Filter designet for bruk med Sundström halvmasker og helmasker. Artikkelnummer: 114638 Lev.artikkelnr: H02-5312 Ean artikkelnr: 292203102531 Materialklasse TJN20A1 Tekniske data Varemerke: Sundström Forpakningsstørrelser: 1 Stk/4 Stk/40 Stk/280 Stk Type: A1B1EK1 Sertifisert i henhold til: EN 14387:2004 + A1:2008 Beskytter mot syre røyk: Ja Beskytter mot organisk damp: Ja Beskytter mot ammoniakk: Ja
GASSFILTER A1B1E1 GUARDIAN PAKKE À 2 STK
Høydepunkter A1B1E1-filteret fanger opp organiske damper, uorganiske gasser og sure gasser Når du bruker Adflo-masken med Gass-/dampfilter, kan det hende du trenger en pusteluftslange med lyddemper (83 40 09) og det langtidsbatteriet (83 76 31) Partikkelglass, gassfiltre og luktfilter/pad tilgjengelig Installasjonen er enkel og sikker For den høyeste formen for sikkerhet og komfort, bør du […]