Nettbutikken viser et lite utvalg av hva vi har av varer i butikken og kan skaffe fra våre leverandører.
Netthandelen er satt opp primært for bedrifter/industrikunder og derav viser priser eks mva.
Er du industrikunde hos oss, registrer deg for å se alle kampanjer og priser som vi har ute her på siden. Registrer deg her
Kjemikalier selges bare til bedrifter i netthandel hvor det ligger avtale.
Alle ordre som legges inn med kjemikalier til andre slettes automatisk.
Gjengetapp M12 fingjenget E513M12X1.0 NO2
Straight flute hand tap NO2 with a 4-6xP second lead, for ISO-Metric Fine thread M12 with 1.00 mm pitch and 6H class of fit, dimensions according to ISO 529 standard with 9.0mm shank and 7.1mm square drive, HSS with bright finish for 1.5xD through or blind hole threading in free machining and plain carbon steel […]
Gjengetapp M12 fingjenget E513M12X1.0 NO1
Straight flute hand tap NO1 with a 6-8xP taper lead, for ISO-Metric Fine thread M12 with 1.00 mm pitch and 6H class of fit, dimensions according to ISO 529 standard with 9.0mm shank and 7.1mm square drive, HSS with bright finish for 1.5xD through or blind hole threading in free machining and plain carbon steel […]
Gjengetapp EX401/8 BSP
Spiral flute tap with chamfer form C with a 2-3xP plug lead, for British Standard Pipe thread G 1/8" with 28 TPI and Normal class of fit, dimensions according to DIN 5156 standard with 7.0mm shank and 5.5mm square drive, powder metallurgical HSS-E with bright finish and 45° helix angle for 2.5xD blind hole threading […]
Gjengetapp EX401.1/4
EX401.1/4 G(BSP) Machine Tap Spiral Flute 45° Material ID: 5974202 Spiral flute tap with chamfer form C with a 2-3xP plug lead, for British Standard Pipe thread G 1.1/4" with 11 TPI and Normal class of fit, dimensions according to DIN 5156 standard with 32.0mm shank and 24.0mm square drive, powder metallurgical HSS-E with bright […]
Gjengetapp EP213/8 UNC
Spiral point tap with chamfer form B with a 3.5-5xP second lead, for Unified National Coarse thread UNC 3/8" with 16 TPI and 2B class of fit, dimensions according to DIN 2184-1 standard with 10.0mm shank and 8.0mm square drive, powder metallurgical HSS-E with steam tempered surface finish for 2.5xD through hole threading in general […]
Gjengetapp E500M12NO1
Straight flute hand tap NO1 with a 6-8xP taper lead, for ISO-Metric thread M12 with 1.75 mm pitch and 6H class of fit, dimensions according to ISO 529 standard with 9.0mm shank and 7.1mm square drive, HSS with bright finish for 1.5xD through or blind hole threading in free machining and plain carbon steel
Gjengesnitt M6 F108
Solid round die with a gun nose, for ISO-Metric thread M6 with 1.00 mm pitch and 6g class of fit, dimensions according to ISO 2568 standard with 20mm outside diameter and 7mm thickness, cobalt based HSS-E with lapped surface finish for threading in alloy and tool steel, martensitic and austenitic stainless steel and austenitic or […]
Gjengesnitt M24 F100
Solid round die with a gun nose, for ISO-Metric thread M24 with 3.00 mm pitch and 6g class of fit, dimensions according to ISO 2568 standard with 55mm outside diameter and 22mm thickness, HSS with lapped surface finish for threading in free machining and plain carbon steel, ferritic stainless steel and gray, malleable, ductile and […]
Gjengesnitt M16 F108
Solid round die with a gun nose, for ISO-Metric thread M16 with 2.00 mm pitch and 6g class of fit, dimensions according to ISO 2568 standard with 45mm outside diameter and 18mm thickness, cobalt based HSS-E with lapped surface finish for threading in alloy and tool steel, martensitic and austenitic stainless steel and austenitic or […]
Gjengesnitt M10 F108
Solid round die with a gun nose, for ISO-Metric thread M10 with 1.50 mm pitch and 6g class of fit, dimensions according to ISO 2568 standard with 30mm outside diameter and 11mm thickness, cobalt based HSS-E with lapped surface finish for threading in alloy and tool steel, martensitic and austenitic stainless steel and austenitic or […]
Gjengebakke F3207/16X1.5/16 UNC
Adjustable circular split die, for Unified National Coarse thread UNC 7/16" with 14 TPI, to reduce the torque when cutting by hand split dies can be adjusted in small increments up to a maximum of approximately 0.006", dimensions according to BS 1127:1950 standard with 1.5/16" outside diameter and 7/16" thickness, HSS with bright finish for […]
Gjengebakke F1701/8 BSP
Solid round die with a gun nose, for British Standard Pipe thread G 1/8" with 28 TPI and class A tolerance, dimensions according to ISO 2568 standard with 30mm outside diameter and 11mm thickness, HSS with lapped surface finish for threading in free machining and plain carbon steel, ferritic stainless steel and gray, malleable, ductile […]
G2361 FORSENKERSETT 6,3 – 20,5 MM
FORSENKERSETT 90° 6.3-10.4-16. 5-20.5 G2362 DORMER
G14216.5
Countersink with 3-flutes, 90° chamfering angle, maximum diameter 16.50mm with an overall length of 60mm and a head length of 10.5mm and 10mm straight shank, according to DIN 335 C standard to produce a conical seat for ISO Metric countersunk-head screws with a minium hole diameter of 3.20mm, HSS with standard bright finish for machining […]
F312 M14X1.5 gjengebakke
Hexagon die nut, for ISO-Metric Fine thread M14 with 1.50 mm pitch and 6g class of fit, dimensions according to BS 1127:1950 standard with 1.3000" width across flat and 5/8" thickness, HSS with bright finish for repairing damaged thread in free machining and plain carbon steel, ferritic stainless steel and gray, malleable, ductile and compacted […]
F100M8
F100M8 M Gun Nosed Die Material ID: 5978686 Solid round die with a gun nose, for ISO-Metric thread M8 with 1.25 mm pitch and 6g class of fit, dimensions according to ISO 2568 standard with 25mm outside diameter and 9mm thickness, HSS with lapped surface finish for threading in free machining and plain carbon steel, […]
F100M12
F100M12 M Gun Nosed Die Material ID: 5978256 Solid round die with a gun nose, for ISO-Metric thread M12 with 1.75 mm pitch and 6g class of fit, dimensions according to ISO 2568 standard with 38mm outside diameter and 14mm thickness, HSS with lapped surface finish for threading in free machining and plain carbon steel, […]
EX401/8 maskingjengetapp 1/8″
Spiral flute tap with chamfer form C with a 2-3xP plug lead, for British Standard Pipe thread G 1/8" with 28 TPI and Normal class of fit, dimensions according to DIN 5156 standard with 7.0mm shank and 5.5mm square drive, powder metallurgical HSS-E with bright finish and 45° helix angle for 2.5xD blind hole threading […]