Nettbutikken viser et lite utvalg av hva vi har av varer i butikken og kan skaffe fra våre leverandører.
Netthandelen er satt opp primært for bedrifter/industrikunder og derav viser priser eks mva.
Er du industrikunde hos oss, registrer deg for å se alle kampanjer og priser som vi har ute her på siden. Registrer deg her
Kjemikalier selges bare til bedrifter i netthandel hvor det ligger avtale.
Alle ordre som legges inn med kjemikalier til andre slettes automatisk.
E500M12NO2 Gjengetapp 12mm
Straight flute hand tap NO2 with a 4-6xP second lead, for ISO-Metric thread M12 with 1.75 mm pitch and 6H class of fit, dimensions according to ISO 529 standard with 9.0mm shank and 7.1mm square drive, HSS with bright finish for 1.5xD through or blind hole threading in free machining and plain carbon steel Description […]
Dormer gjengetapp E240M
Spiral point tap Blue Shark with chamfer form B with a 3.5-5xP second lead, for ISO-Metric thread , dimensions according to DIN 371 standard powder metallurgical HSS-E with steam tempered surface finish for 2.5xD through hole threading in stainless steel
Dormer forsenker G13630.0 30,0mm
Countersink with 3-flutes, 90° chamfering angle, maximum diameter 30.00mm with an overall length of 71mm and a head length of 18.5mm and 12mm straight shank, according to DIN 335 C standard to produce a conical seat for ISO Metric countersunk-head screws with a minium hole diameter of 4.20mm, HSS with standard bright finish for machining […]
Dormer forsenker G13625.0 25,0mm
Countersink with 3-flutes, 90° chamfering angle, maximum diameter 25.00mm with an overall length of 67mm and a head length of 15.5mm and 10mm straight shank, according to DIN 335 C standard to produce a conical seat for ISO Metric countersunk-head screws with a minium hole diameter of 3.80mm, HSS with standard bright finish for machining […]
Dormer forsenker G13620.5 20,5mm
Countersink with 3-flutes, 90° chamfering angle, maximum diameter 20.50mm with an overall length of 63mm and a head length of 13mm and 10mm straight shank, according to DIN 335 C standard to produce a conical seat for ISO Metric countersunk-head screws with a minium hole diameter of 3.50mm, HSS with standard bright finish for machining […]
Dormer forsenker G13616.5 16,5mm
Countersink with 3-flutes, 90° chamfering angle, maximum diameter 16.50mm with an overall length of 60mm and a head length of 10.5mm and 10mm straight shank, according to DIN 335 C standard to produce a conical seat for ISO Metric countersunk-head screws with a minium hole diameter of 3.20mm, HSS with standard bright finish for machining […]
Dormer forsenker G13612.4 12,4mm
G13612.4 Countersink - 90° Bestillingsnummer: 5973364 Countersink with 3-flutes, 90° chamfering angle, maximum diameter 12.40mm with an overall length of 56mm and a head length of 8.5mm and 8mm straight shank, according to DIN 335 C standard to produce a conical seat for ISO Metric countersunk-head screws with a minium hole diameter of 2.80mm, HSS […]
Dormer forsenker G13610.4 10,4mm
G13610.4 Countersink - 90° Bestillingsnummer: 5973360 Countersink with 3-flutes, 90° chamfering angle, maximum diameter 10.40mm with an overall length of 50mm and a head length of 7.6mm and 6mm straight shank, according to DIN 335 C standard to produce a conical seat for ISO Metric countersunk-head screws with a minium hole diameter of 2.50mm, HSS […]
C50510.0 ball-nose end mill
Short series ball-nose end mill with 2 flutes, diameter 10mm with 22mm length of cut, 72mm overall length and 5mm full profile radius, according to DIN 844 K standard with a 10mm Weldon shank, cobalt based HSS-E with bright finish, 30° helix and 12° rake angle for copy milling in free machining steel and copper […]
C3528.0 Pinnefres
Short series slot drill with 3 flutes, diameter 8mm with 19mm length of cut and 69mm overall length, according to DIN 844 K standard with a 10mm Weldon shank, powder metallurgical HSS-E with Alcrona coating, 30° helix and 12° rake angle for shoulder milling, slot milling and ramping in steel and cast steel, cast-iron, copper […]
Borkasett Dormer A095204 1.0-13.0mm
Borsett med spiralbor A002 i HSS kvalitet. Titannitrid belagt på spissen for å oppnå lengre levetid ved boring. Egnet for de fleste materialer også rustfritt stål og varmefast austenitisk stål. Kan også brukes i spesiallegeringer som går opp til en hardhet på 300 HB. Din – 338. Sylindrisk skaft som følger diameteren. Spissvinkel : 118° […]
Borkasett Dormer A095201 1.0-10.0mm
Borsett med spiralbor A002 i HSS kvalitet. Titannitrid belagt på spissen for å oppnå lengre levetid ved boring. Egnet for de fleste materialer også rustfritt stål og varmefast austenitisk stål. Kan også brukes i spesiallegeringer som går opp til en hardhet på 300 HB. Din - 338. Sylindrisk skaft som følger diameteren. Spissvinkel : 118° […]
A9406.0 Dormer Lange borer
Long series PFX drill with straight shank, diameter 6mm with an overall length of 139mm and flute length of 91mm according to DIN/ANSI standard with 130° point angle, cobalt based HSS-E with bright finish, quick spiral and parabolic web for 10xD drilling without pecking in steel, stainless steel and super-alloy EAN number 7320760057865 Product number […]
A13019.5 Bor 19.5mm MK
Jobber length drill with taper shank, diameter 19.5mm with an overall length of 238mm and flute length of 140mm according to DIN 345 standard with 118° thinned conical point, HSS with steam tempered finish for 4xD drilling without pecking in steel
A13016.5 Bor 16.5mm MK
Jobber length drill with taper shank, diameter 16.5mm with an overall length of 223mm and flute length of 125mm according to DIN 345 standard with 118° thinned conical point, HSS with steam tempered finish for 4xD drilling without pecking in steel
A130 Bor MK (Konisk) HSS 9.9 mm
Jobber length drill with taper shank, according to DIN 345 standard with 118° thinned conical point, HSS with steam tempered finish for 4xD drilling without pecking in steel
A130 Bor MK (Konisk) HSS 9.8 mm
Jobber length drill with taper shank, according to DIN 345 standard with 118° thinned conical point, HSS with steam tempered finish for 4xD drilling without pecking in steel
A130 Bor MK (Konisk) HSS 9.6 mm
Jobber length drill with taper shank, according to DIN 345 standard with 118° thinned conical point, HSS with steam tempered finish for 4xD drilling without pecking in steel